Please always format your drive before installing PCUAE
Updated: 24/08/2025
================
PCUAE Atari Machine Edition
=========================
The installers have now changed to make it easier for you to install PCUAE AME, let me know if this is easier for you now.
Make sure you install the one you want, if you want to use PCUAE on all Atari machines using one USB Drive then install all of them.
If you want to use a Mode then you need to install it too, so like VICE Mode that runs 8Bit CBM Machines.
Basic Atari Mode is included with this so if you want all of it install the Atari Mode Pack.
To Download PCUAE Atari Machine Edition: Go to… https://projectcarouselusb.eu/pcuae-easy-downloads/ and then click on the machine you want PCUAE to run on by hovering and clicking on the picture of the console on the download page or select `PCUAE 4all Edition 128` for all machines, but will need a 128GB USB Drive.
PCUAE USB Drive needs to formatted as FAT32 and MBR – Master Boot Record, it does not work on a USB Drive using GPT, you can use GUI Format32 to format it into FAT32 and MBR – https://projectcarouselusb.eu/gui-format32/
Atari Machine Edition is on the PCUAE website now.
Atari Gamestation Pro
============================================================================================
Run PCUAE Installer Setup on PC and Install on to a USB Drive… pcuae-setup.exe for Atari Gamestation Pro
=================================================================================================
Once PCUAE is Installed open PCUAE USB Drive and look in the folder `START-PCUAE-ON-AGSP`and it will help you to finish the PCUAE Setup, please read the .pdf in that folder `1. Atari_Gamestation_Pro_Custom_Firmware_Update_Instructions_PCUAE.pdf`.
============================================================================================
You can use a USB-C to USB A Female Adapter below in port 1 on the front of the AGSP and then connect the PCUAE USB Drive to it and PCUAE will see it.
Or Install PCUAE on to a micro SD card and put it into the AGSP, but it is RECOMENDED to run PCUAE from a USB Drive and in USB-C port 1 on the front of the AGSP, its faster that way and loads quicker and plus you can use a SSD Drive too
.
Hope this helps…
Have a nice day, Are you gonna play Atari Today…
Spannernick…